Table of Contents
Advertisement
Super X11DPFF-SN User's Manual
Ipv6 HTTP Support
Select Enabled to enable Ipv6 HTTP boot support. If this feature is disabled, it will not create
the Ipv6 HTTP boot option. The options are Enabled and Disabled.
PXE Boot Wait Time
Use this feature to select the wait time to press the <ESC> key to abort the PXE boot. The
default is 0.
Media Detect Time
Use this feature to select the wait time in seconds for the BIOS ROM to detect the LAN media
(Internet connection or LAN port). The default is 1.
Super IO Confi guration
Super IO Chip AST2500
Serial Port 1 Confi guration
Serial Port 1
Select Enabled to enable the onboard serial port specifi ed by the user. The options are
Enabled and Disabled.
Device Settings (Not available when Serial Port 1 is set to Disabled.)
This feature displays the base I/O port address and the Interrupt Request address of a
serial port specifi ed by the user.
Change Settings (Not available when Serial Port 1 is set to Disabled.)
This feature specifi es the base I/O port address and the Interrupt Request address of Serial
Port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to a
serial port specifi ed.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=2F8h; IRQ=4), (IO=3E8h;
IRQ=4), and (IO=2E8h; IRQ=4).
Serial Port 2 Confi guration
Serial Port 2
Select Enabled to enable the onboard serial port specifi ed by the user. The options are
Enabled and Disabled.
Device Settings (Not available when Serial Port 2 is set to Disabled.)
This feature displays the base I/O port address and the Interrupt Request address of a serial
port specifi ed by the user.
88
Advertisement
Table of Contents
