Table of Contents
Advertisement
Super X11DPFF-SN User's Manual
DIMM Installation
1. Please carefully follow the instructions provided in the previous section to properly
insert DIMM modules on your motherboard. For the system to work properly, please
use memory modules of the same type and speed on the motherboard. To install DIMM
modules, please refer to the layout below for DIMM locations.)
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Use two thumbs together to press both ends of the memory module straight down into
the slot until the module snaps into place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM modules from the motherboard.
X11DPFF-SN
Rev. 1.00
Notches
Release Tabs
Key
Receptive Point
Press both notches
straight down into the
memory slot.
34
Advertisement
Table of Contents
