Table of Contents
Advertisement
When SEL is Full (Available when the item: SEL Components is set to Enabled)
This feature allows the user to specify what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are Do Nothing and Erase Immediately.
BMC Network Confi guration
Update IPMI LAN Confi guration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes. The following items will be displayed:
•
IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is
Failover.
•
IPMI Network Link Status: This item displays the IPMI Network Link status. The default
setting is Dedicated LAN.
•
Confi guration Address Source: This feature displays the source of the current IPMI LAN
address. The default setting is DHCP (Dynamic Host Confi guration Protocol).
•
Station IP Address: This feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
Subnet Mask: This feature displays the sub-network that this computer belongs to. The
value of each three-digit number separated by dots should not exceed 255.
•
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
•
Gateway IP Address: This feature displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
VLAN: Select Enabled to enable IPMI VLAN support. The options are Enabled and Dis-
abled.
*If the item "Update IPMI LAN Confi guration" is set to Yes, the following items will display:
IPMI LAN Selection
Use this feature to select the type of the IPMI LAN. The options are Dedicated, Shared,
and Failover.
IPMI Network Link Status
This item displays the IPMI Network Link status. The default setting is Dedicated LAN.
Confi guration Address Source
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
101
Chapter 4: BIOS
Advertisement
Table of Contents
