Configuration; Activating The B440-C/B441-C - Bosch B443 Installation Manual

12 en | Configuration
5

Configuration

Communicator programming is done through the compatible control panel, plug-in
communicator interface, or universal dual path communicator. Refer to the documentation of
these devices or remote programming software help for more information. For Bosch Cellular
account status and management, use RPS or the online service portal (go to http://
www.conettix.com/Cellular.aspx and click on the Cellular Portal Login link).
Configure network alarm communication routes and settings in the control panel. Cellular
carrier specific settings such as Access Point Name and SIM card security can also be
programmed through the control panel or Conettix Plug-in Communicator Interface.
5.1

Activating the B440-C/B441-C

The activation process assigns a phone number, IP address, and a data plan to the
communicator. Activation occurs using one of three methods:
1.
2.
3.
Notice!
A valid Bosch Installer Services account is required for activation
2018.04 | 02 | F.01U.345.070
Using the cellular activation tool in RPS.
By submitting a support ticket in the Bosch Cellular Portal email at:
installer.services@us.bosch.com.
Calling Bosch Installer Services (800-289-0096). Provide the MEID number found on the
box or on the communicator for activation.
Installation Manual
Conettix Cellular Communicators
Bosch Security Systems, Inc.