Fluke 5502A Operator's Manual page 213

x
IEEE-488
ISCR0?
Bookmark not defined.
(Instrument Status 1 to 0 Change Register query) Shows and clears the contents of the
Instrument Status 1 to 0 Change Register.
Response: <value> (decimal equivalent of the 16 bits, 0 to 32767)
Example: ISCRO? shows 6272
Shows decimal 6272 (binary 0001010001000000) if bits 12 (SETTLED), 10
(REMOTE), and 6 (HIVOLT) are set to 1.
x
IEEE-488
ISCR1?
Bookmark not defined.
(Instrument Status 0 to 1 Change Register query) Shows and clears the contents of the
Instrument Status 0 to 1 Change Register.
Response: <value> (decimal equivalent of the 16 bits, 0 to 32767)
Example: ISCR1? shows 6272
Shows decimal 6272 (binary 0001010001000000) if bits 12 (SETTLED), 10
(REMOTE), and 6 (HIVOLT) are set to 1.
x x
IEEE-488
ISR?
Bookmark not defined.
(Instrument Status Register query) Shows contents of the Instrument Status Register.
Response: <value> (decimal equivalent of the 16 bits, 0 to 32767)
Example: ISR? shows 6272
Shows decimal 6272 (binary 0001010001000000) if bits 12 (SETTLED), 10
(REMOTE), and 6 (HIVOLT) are set to 1.
x
IEEE-488
LCOMP
Bookmark not defined.
(Inductive compensation command) Activates or deactivates inductive load
compensation for ac current output. For current output, compensation is permitted when
the frequency is less than 440 Hz and the amplitude is less than 0.33 A. Compensation is
also permitted when the frequency is less than 1 kHz and the amplitude is larger than or
equal to 0.33 A.
Parameters: OFF
ON
Example:
LCOMP ON
x
IEEE-488
LCOMP?
Bookmark not defined.
(Inductive compensation query) Shows if inductive load compensation for ac current
output is active.
Responses: (character) OFF (Inductive load compensation circuitry is off)
(character) ON
Example: LCOMP? shows ON
x x
RS-232 Sequential
x x
RS-232 Sequential
x
RS-232 Sequential
x x
RS-232 Sequential
(turns off the inductive load compensation circuitry)
(turns on the inductive load compensation circuitry
x x
RS-232 Sequential
(Inductive load compensation circuitry is on)
x
x
Overlapped
Coupled
x
x
Overlapped
Coupled
x x
Overlapped Coupled
x x
Overlapped Coupled
x
x
Overlapped Coupled
6
Remote Commands
Commands
Error!
Error!
Error!
Error!
Error!
6-21