Table of Contents
Advertisement
• Turn Sensitivity and Time Delay to minimum, cover the sensor's lens
with a cloth (not your hand), be still and allow the sensor to time-out.
• Check that the connection between the BROWN and RED wires is
closed.
• Check that the connection between the ORANGE and RED wires is
open.
Power Pack High Voltage Checklist:
CAUTION: Use proper high voltage precautions.
1. Check that power pack high voltage wire connections are correct and
secure.
2. Check that the power pack is rated at the correct voltage.
3. Check that there is high voltage going into the power pack.
4. Try another power pack (if available).
ORDERING INFORMATION
Catalog#
CI-200
CI-200-1
BZ-50
B347D-P
S120/277/347E-P
Sensors are white
WARRANTY INFORMATION
WattStopper warranties its products to be free of defects in materials
and workmanship for a period of five (5) years. There are no obligations or
liabilities on the part of WattStopper for consequential damages arising
out of or in connection with the use or performance of this product or
other indirect damages with respect to loss of property, revenue, or profit,
or cost of removal, installation or reinstallation.
2800 De La Cruz Blvd Santa Clara CA 95050
Description
20–30VDC Occupancy Sensor
with Extended Range Lens (Standard)
20–30VDC Occupancy Sensor
with High Density /Reduced Range Lens
Power Pack:
Power Pack:
Slave Pack:
www.wattstopper.com 800.879.8585
17161r3 1/2015
120/277VAC, 50/60Hz,
20A ballast or incandescent
347VAC, 60Hz, 150mA, 15A
ballast
120/277VAC, 60Hz, 20A ballast
347VAC. 60Hz, 15A ballast
Recycle
Please
Advertisement
Table of Contents
