Table of Contents
Advertisement
Mounting and Placement of System Components
Decide where to install the TeamWork system and where the individual components will be placed.
Place the Cable Cubby somewhere that provides easy access for as many users as possible. Ensure that there is ample
z
space for cables under the table. Ensure that the edge on which the lid opens is correctly oriented.
Place the system controller close to the display.
z
Place the MPS 601 switcher close to the Cable Cubby.
z
VGA Show Me
Cable
Extron
Cable Cubby
Cable Access Enclosure
Installing the Cable Cubby in the Table
Before cutting the table and installing the Cable Cubby, see the Cable Cubby Installation Guide (see www.extron.com).
ATTENTION:
•
Ensure that the orientation of the Cable Cubby and the hole dimensions are correct before cutting the table.
•
Assurez vous que la position du Cable Cubby et les dimensions du trou soient correctes avant de couper la table.
•
After installation, secure the cables to avoid them becoming tangled (see the figure above).
•
Après l'installation, sécurisez les câbles de façon à éviter qu'ils ne s'emmêlent (voir l'illustration au-dessus).
HDMI Show Me
Cable
Switcher
Power
Supply
Secure Show Me Cable
to Cable Cubby and create a
loop.
INPUTS
INPUTS
OUTPUT
SIGNAL
1
2
3
4
5
6
AUTO
1
2
3
4
5
6
SWITCH
CONFIG
HDCP
MPS 601
MEDIA PRESENTATION SWITCHER
IPL T PC1
POWER
100
R
TX
INPUT
LINK
RX
IR
ACT
Shown mounted with
optional Extron UTS 100/UTS 150
Under Table Shelf System.
1080p Native
Resolution Display
HDMI Video to Display
AC Power To Display
System
Controller
5
Advertisement
Table of Contents
