Preparing Installation Of The Cover Plate - Viega Eco Plus Instructions For Use Manual

3.2.3

Preparing installation of the cover plate

17
19
17
Viega Eco Plus
Universal shower WC element
Firstly, mount the locating surface for the cover plate flush with the
finished wall surface.
The proceed as follows:
Loosen the four threaded nuts on the element (SW 17).
Loosen the four front threaded nuts on the sides of the H-beam
(SW 17).
Align all four points flush with the finished wall surface by screwing
in and unscrewing the threaded screws.
Check with spirit level.
Handling
19 from 22