Table of Contents
Advertisement
• Advanced Management Module Command-Line Interface Reference Guide
This document explains how to use the advanced management module command-line interface (CLI) to
directly access BladeCenter management functions. The command-line interface also provides access to
the text-console command prompt on each blade server through a Serial over LAN (SOL) connection.
• Advanced Management Module Messages Guide
This document provides a complete list of all non-device specific events and recommended actions,
sorted by event ID. Device-specific event information is available in the Problem Determination and
Service Guide.
In addition to the documentation in this library, be sure to review the Planning and Installation Guide for your
BladeCenter chassis for information to help you prepare for system installation and configuration.
To check for updated documentation, complete the following steps.
1. Go to http://www.ibm.com/supportportal/.
2. Under Product support, click BladeCenter.
3. Under Popular links, click Publications lookup.
4. From the Product family menu, select BladeCenter HX5 .
You can also find documentation that is related to BladeCenter products at http://publib.boulder.ibm.com/
infocenter/bladectr/documentation/index.jsp.
The IBM Documentation CD
The IBM Documentation CD contains documentation for your blade server in Portable Document Format
(PDF). It includes the IBM Documentation Browser to help you find information quickly.
You can run the IBM Documentation CD on any personal computer that meets the hardware and software
requirements.
Hardware and software requirements
Use this information to determine the minimum hardware and software requirements for the blade server.
The IBM Documentation CD requires the following minimum hardware and software:
• Microsoft Wndows XP, Windows 2000, or Red Hat Enterprise Linux 5 Server
• 100 MHz microprocessor
• 32 MB of RAM
• Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating systems
Using the Documentation Browser
Use these instructions to start the Documentation Browser.
Use the Documentation Browser to browse the contents of the CD, read brief descriptions of the documents,
and view documents, using Adobe Acrobat Reader or xpdf. The Documentation Browser automatically
detects the regional settings in use in your system and displays the documents in the language for that
region (if available). If a document is not available in the language for that region, the English-language
version is displayed.
Use one of the following procedures to start the Documentation Browser:
• If Autostart is enabled, insert the CD into the CD drive. The Documentation Browser starts automatically.
4
BladeCenter HX5 Blade ServerInstallation and User's Guide
Advertisement
Table of Contents
