Lenovo BladeCenter HX5 Installation And User Manual page 73

Blade server
Table of Contents

Advertisement

a. Using a screwdriver, remove each of the screws on the right access panel.
b. Lift the access panel away from the blade server.
2. Remove the embedded hypervisor card access panel:
a. Using a screwdriver, remove each of the screws on the right access panel.
b. Lift the access panel away from the blade server.
3. Install the EMC gasket on the upper ridge of the BladeCenter HX5 blade server bezel.
4. Install the operator control panel access panel:
.
Chapter 3
Installing optional devices
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

7873787219101909

Table of Contents