5. WIRING
This section explains the wiring for the high-speed counter module.
5.1
Wiring Method to Each Module
The following diagram shows the wiring of the master module, remote
module and high-speed counter module with dedicated cable for CC-
Link.
Master module
(Blue)
DA
(White)
DB
(Yellow)
Terminal
DG
resistor
SLD
FG
Always connect the "terminal resistors" provided with the master module
to the modules at both ends of data link.
(Connect between DA and DB)
High-speed counter module
(Blue)
(White)
(Yellow)
CC-Link
dedicated cable
Point
(Blue)
DA
(White)
DB
(Yellow)
DG
SLD
CC-Link
FG
dedicated cable
19
Remote module
(Blue)
DA
(White)
DB
(Yellow)
Terminal
DG
resistor
SLD
FG