Mitsubishi Electric AJ65BT-D62 User Manual page 19

Item
Noise durability
Connected terminal block
Applicable wire size
Applicable crimp contact
Module installation screws
Applicable DIN rail
External power supply
Allowable momentary power failure period
Weight
*1 Counting speed is affected by the duration of rise and fall periods. The speeds that can be
counted are indicated in the table below.
Take note that the count may become incorrect when a pulse with a large rise or fall period
is counted.
Counting speed
setting switch
Rise/fall period
t = 0.1µs or less
t = 1.25µs or less
t = 12.5µs or less
t = 250µs or less
HIGH
1 phase 2 phase
input input
400kPPS 300kPPS
200kPPS 200kPPS
20kPPS 20kPPS
- -
Specification
Based on a noise simulator with 500Vp-p noise
voltage, 1µs noise width and 25-60Hz noise
frequency
27 terminal blocks (seven M3.5 screws)
0.75 to 2.00mm
RAV1.25-3, RAV2-3.5 (JIS C 2805 compliant)
M4×0.7mm(0.03in.)×16mm(0.63in.) or larger
screws (tightening torque range 0.78 to
1.18N•m)
Can also be mounted using a DIN rail
TH35-7.5Fe, TH35-7.5Al, TH35-15Fe
(JIS C 2812 compliant)
18 to 28.8VDC
Current consumption: 100mA (for 24VDC)
LOW
1 phase 2 phase
input input
- -
10kPPS 7kPPS
1kPPS 700PPS
500PPS 250PPS
5
2
1ms
0.42kg
t t