Programming The P.c.b - Immergas VICTRIX TERA 24 PLUS Instruction Booklet And Warning

3.8 PROGRAMMING THE P.C.B.

e boiler is prepared for possible programming of
several operation parameters. By modifying these
parameters as described below, the boiler can be
adapted according to speci c needs.
To access the programming phase, press and hold
the buttons " " and "
than 5 seconds, the display shows two dashes
"--" ashing and you must enter the password
to access the programming menus.
To enter the rst digit use the buttons to adjust
the DHW " ", to enter the second digit
use the buttons to adjust the central heating
temperature " ".
To confirm the password (
the menu, press the operating mode button
" ".
Programming phase sequence.
Menu
"P"
+
"t"
> 5''
"A"
"S"
Once in the menu, you can cyclically scroll the
four submenus (P, t, A, S) by pressing the DHW
buttons "
button "
" for more
e rst digit of the central indicator (19) shows
the family of the parameter, while the second
digit shows its number.
39
) and access
Pressing the mode of operation button
" " displays the value of the selected
parameter and by pressing the buttons to adjust
the central heating temperature "
can adjust its value.
40
P0 ÷ P5
t0 ÷ t9
A0 ÷ A6
S0 ÷ S2
", to access the menu press the
".
41
42
" you
43
Parameter
value
33
Press the mode of operation button "
" for more than 1 second to store the parameter
value; con rmation is given by the word "
which appears for 2 seconds.
If you want to exit a parameter without changing
its value, press the button "
Wait for 15 minutes or press the "
button to exit programming mode.
(Without mem-
orising)
> 1''
(Memorise)
"
43
".
"
" "
45