Before Faxing; Send A Fax - Brother DCP-T310 Reference Manual

6
Fax

Before Faxing

Telephone Line Interference/
VoIP
Related Models:
MFC-T810W
If you are having problems sending or
receiving a fax due to possible interference on
the telephone line or if you are using a VoIP
system, we recommend changing the modem
speed to minimise errors in fax operations.
1
Press Menu.
2
Press a or b to select the following:
a. Select [Initial Setup].
Press OK.
b. Select [Compatibility].
Press OK.
c. Select [Normal] or [Basic(for
VoIP)]. Press OK.
• [Basic(for VoIP)] reduces
the modem speed to 9,600 bps
and turns off colour fax receiving
and Error Correction Mode
(ECM), except for colour fax-
sending. Unless interference is a
recurring problem on your
telephone line, you may prefer to
use it only when needed.
To improve compatibility with
most VoIP services, Brother
recommends changing the
compatibility setting to
[Basic(for VoIP)].
• [Normal] sets the modem
speed at 14,400 bps.
3
Press Stop/Exit.
• VoIP (Voice over IP) is a type of phone
system that uses an Internet
connection, rather than a traditional
phone line.
• Brother does not recommend the use
of a VoIP line. VoIP limitations in
general can cause some functions of
the fax machine not to work correctly.

Send a Fax

Related Models:
MFC-T810W
NOTE
This feature is available only for monochrome
faxes.
1
Load your document in the ADF or place
it on the scanner glass.
2
Press (FAX).
3
Enter the fax number in one of the
following ways:
• Dial Pad (Enter the fax number
manually.)
Press all digits of the number using
the dial pad.
• Outgoing call (Select a number from
the Outgoing Call history.)
a. Press Redial/Pause on the
control panel.
b. Press a or b to select [Outgoing
Call]. Press OK.
c. Select the number you want, and
then press OK.
• Caller ID (Select a number from the
Caller ID history.)
12