Check The Print Alignment From Your Brother Machine - Brother DCP-T310 Reference Manual

7
Do one of the following:
• If print head cleaning is needed,
press Colour Start to start the
cleaning procedure.
• If print head cleaning is not needed,
press Stop/Exit to finish the Print
Quality check.
8
After the cleaning procedure is finished,
press a. Then, press Colour Start.
The machine prints the Print Quality
Check Sheet again. Check the quality of
the four colour blocks on the sheet
again.
If you clean the print head at least five times
and the print has not improved, try cleaning
the print head again up to three more times. If
the print has not improved, contact Brother
customer service or your local Brother dealer.
IMPORTANT
DO NOT touch the print head. Touching the
print head may cause permanent damage and
may void the print head's warranty.
When a print head nozzle is clogged, the
printed sample looks like this.
After the print head nozzle is cleaned, the
horizontal lines are gone.
For more detailed information, see the
Online User's Guide: If You Are Having
Difficulty with Your Machine.
Check the Print
Alignment from Your
Brother Machine
If your printed text becomes blurred or images
become faded after transporting the machine,
adjust the print alignment.
1
Press Menu.
2
Press a or b to select the following:
a. Select [Maintenance]. Press OK.
b. Select [ImproveQuality].
Press OK.
c. Select [Alignment]. Press OK.
3
Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
16