Brother DCP-T310 Reference Manual page 22

Error Message
Not Registered
Out of Memory
Paper Jam
Print Unable XX
Repetitive No
Paper Fed
Action
You tried to access a Speed Dial number that has not been stored in
the machine.
Set up the Speed Dial number.
If a fax-sending or copy operation is in progress:
• Press Stop/Exit and wait until the other operations that are in
progress finish, and then try again.
• Press Mono Start or Colour Start to copy the pages scanned so
far.
Remove the jammed paper.
For more detailed information, see the Online User's Guide: Printer
Jam or Paper Jam.
Make sure the paper guides are set to the correct paper size.
DO NOT extend the paper tray when you load A5 or smaller size
paper.
Do not put more than one sheet of paper in the manual feed slot at any
one time. Wait until the LCD prompts you to load another sheet of
paper before you feed the next sheet of paper in the manual feed slot.
Clean the paper pick-up rollers.
For more detailed information, see the Online User's Guide: Clean the
Paper Pick-up Rollers.
A foreign object, such as a paper clip or a piece of ripped paper, is in
the machine.
Open the scanner cover and remove any foreign objects and paper
scraps from inside the machine.
If the error message continues:
• (MFC-T810W)
Transfer your faxes to another fax machine or your computer before
disconnecting the machine so you will not lose any important
messages. Then, disconnect the machine from the power for
several minutes and reconnect it.
For more detailed information, see the Online User's Guide:
Transfer Your Faxes or Fax Journal Report.
• (DCP-T310/DCP-T510W/DCP-T710W)
Disconnect the machine from the power for several minutes, and
then reconnect it.
Clean the paper pick-up rollers.
For more detailed information, see the Online User's Guide: Clean the
Paper Pick-up Rollers.
21