Brother DCP-T310 Reference Manual page 21

Error Message
DR Mode in Use
(For some countries)
High Temperature
Ink Low
InkBox Full
InkBox NearFull
Low Temperature
No Caller ID
(Not available for
Taiwan and some
countries)
No Paper Fed
Action
(For some countries)
The machine is in Distinctive Ring mode. You cannot change the
Receive Mode from Manual to another mode.
Set Distinctive Ring to Off.
For more detailed information, see the Online User's Guide: Turn off
Distinctive Ring.
After cooling the room, allow the machine to cool down to room
temperature. Try again when the machine has cooled down.
The amount of remaining ink in one or more of the ink tanks is low.
Look through the window of the ink tank to confirm the actual amount
of remaining ink.
If the remaining ink level is at or below the lower line under the
minimum fill mark, refill the ink tank.
For more detailed information, see the Online User's Guide: Refill the
Ink Tanks.
• You can still scan even if the ink is low or needs to be refilled.
The ink absorber box must be replaced. Contact Brother customer
service or your local Brother Authorised Service Centre to have your
machine serviced.
The ink absorber box must be replaced soon. Contact Brother
customer service or your local Brother dealer.
• The ink absorber box absorbs the small amount of ink emitted
during print head cleaning.
After warming the room, allow the machine to warm up to room
temperature. Try again when the machine has warmed up.
There is no incoming call history. You did not receive calls or you have
not subscribed to the Caller ID service from your telephone company.
To use the Caller ID feature, contact your telephone company.
For more detailed information, see the Online User's Guide: Caller ID.
Do one of the following:
• Refill the paper tray, and then press Mono Start or Colour Start.
• Remove and reload the paper, and then press Mono Start or
Colour Start.
The paper was not inserted in the centre position of the manual feed
slot.
Remove the paper and reinsert it in the centre of the manual feed slot,
and then follow the LCD instructions.
For more detailed information, see the Online User's Guide: Load
Paper in the Manual Feed Slot.
The Jam Clear Cover is not closed correctly.
20