Brother DCP-T310 Reference Manual page 14

(Not available for Taiwan and some
countries)
a. Press Redial/Pause on the
control panel.
b. Press a or b to select [Caller
ID]. Press OK.
c. Select the number you want, and
then press OK.
• [Address Book] (Select a number
from the Address Book.)
a. Select ([Address Book])
on the control panel.
b. Press OK.
- To search a speed dial number, press
a. Enter the two-digit number you want
using the dial pad, and then press OK.
- To search alphabetically, enter the first
letter of the name using the dial pad,
and then press OK. Press a or b to
select the name, and then press OK.
c. Press a, b, d or c to select the
number you want. Press OK.
4
To change the fax settings, press
Options, a or b to select the setting you
want to change, and then press OK.
When finished, press Clear/Back.
5
Press Mono Start
6
Do one of the following:
• If you are using the ADF, the machine
starts scanning and sending the
document.
• If you are using the scanner glass,
the machine starts scanning the first
page.
Go to the next step.
7
When the LCD displays [Next
Page?], do one of the following:
• Press a to scan another page. Place
the next page on the scanner glass,
and then press OK. The machine
starts scanning the page.
Repeat this step for each additional
page.
• Press b to send the fax when finished
scanning pages. The machine starts
sending the document.
13