Technical data and limit values
5.4.1 Ethernet
Number of ports:
Optical isolation:
Cable length:
Bandwidth:
Protocol:
MAC address:
5.4.2 Trigger input
24 V trigger input
Number of inputs:
Filter/Protective circuit:
Optical isolation:
Nominal voltage:
Input voltage:
Input current:
Max. input frequency:
Logic input levels:
5 V trigger input (optional)
Number of inputs:
Filter/Protective circuit:
Optical isolation:
Nominal voltage:
Input voltage:
Input current:
Max. input frequency:
Signal threshold:
5.4.3 Synchro input and output
Number of inputs:
Number of outputs:
Optical isolation:
Output type:
Output frequency:
Driver level (master) V
Receiver level (slave) V
www.addi-data.com
:
A-B
:
A-B
2
1000 V
150 m (max. for CAT5E UTP)
10 Mbps (auto-negotiation)
100 Mbps (auto-negotiation)
10 Base-T according to IEEE 802.3
100 Base-TX according to IEEE 802.3
00:0F:6C:##:##:## (unique for each device)
1
low-pass/transorb diode
1000 V (via opto-couplers)
24 VDC
0-30 V
11 mA typ. (at nominal voltage)
2 MHz (at nominal voltage)
UH
: 30 V
max
UH
: 19 V
min
UL
: 14 V
max
UL
: 0 V
min
1
low-pass/transorb diode
1000 V (via opto-couplers)
5 VDC
0-5 V
12 mA typ. (at nominal voltage)
1 MHz (at nominal voltage)
2.2 V typ.
1
1
1000 V
RS422
800 kHz typ.
≤ -1.5 V (low)
≥ 1.5 V (high)
≤ -200 mV (low)
≥ 200 mV (high)
23
MSX-E1516
Need help?
Do you have a question about the MSX-E1516 and is the answer not in the manual?