Technical data and limit values
5.4.4 Digital inputs
Number of inputs:
Overvoltage protection:
Optical isolation:
Nominal voltage:
Input voltage:
Max. input frequency:
Input impedance:
Logic input levels:
5.4.5 Digital outputs
Number of outputs:
Optical isolation:
Output type:
Nominal voltage:
Supply voltage:
Current:
Output current per output:
Short-circuit current per output:
R
ON resistance:
DS
Switch-on time:
Switch-off time:
Overtemperature (shut-down):
Temperature hysteresis:
Diagnosis:
5.4.6 Watchdog
Number:
Resolution:
Time base:
Time value range:
2 Group 1: Digital outputs 0 to 3, 8 to 11 and the respective 24 V output
Group 2: Digital outputs 4 to 7, 12 to 15 and the respective 24 V output
www.addi-data.com
16 (2 per female connector / common GND
according to IEC 1131-2)
30 V
1000 V (via opto-couplers)
24 VDC
0-30 V
1 MHz (at nominal voltage)
> 1 MΩ
UH
: 30 V
max
UH
: 19 V
min
UL
: 14 V
max
UL
: 0 V
min
16 (2 per female connector)
1000 V (via opto-couplers)
high-side (load to ground according to
IEC 1131-2)
24 VDC
18-30 V
1.85 A max. (for each group
500 mA max.
1.7 A max.
shut-down logic at 24 V, R
280 mΩ max.
100 μs (max. R
= 48 Ω of 80 % V
L
150 μs (max. R
= 48 Ω of 10 % V
L
135 °C max. (output driver)
15 °C typ. (output driver)
at overtemperature of one or more outputs
1
16-bit
μs, ms, s (programmable)
1 to 65535
24
MSX-E1516
2
) via PTC
= 10 mΩ
Load
)
out
)
out
Need help?
Do you have a question about the MSX-E1516 and is the answer not in the manual?