Web interface: Quick access to the MSX-E system
In this section, you can select for which channel and for which respective edge type an event datagram
should be generated.
In addition, a time stamp can be set for each event. The event logic is stopped via the corresponding
button.
The current status of the digital inputs or outputs can be saved via the synchro trigger and be sent via
the data server. A time stamp is available as an option.
www.addi-data.com
Fig. 4-4: Digital I/O: Digital Input/Output events
NOTICE!
Please read Chapter 3.6 if you have activated the digital input
filter!
Fig. 4-5: Digital I/O: Digital Input/Output latch event
19
MSX-E1516
Need help?
Do you have a question about the MSX-E1516 and is the answer not in the manual?