Web Interface: Quick Access To The Msx-E System; I/O Configuration; Menu Item "Digital I/O; Fig. 4-1: Digital I/O: Channels - Addi-Data MSX-E1516 Technical Description

Ethernet digital i/o system
Table of Contents

Advertisement

Web interface: Quick access to the MSX-E system

MSX-E1516
4 Web interface: Quick access to the MSX-E system

4.1 "I/O Configuration"

In this manual, the function-specific pages of the MSX-E1516 web interface, which are located under
the menu item "I/O Configuration", are described. For further information on the MSX-E web
interface, please refer to the general manual of the MSX-E systems (see PDF link).

4.1.1 Menu item "Digital I/O"

Fig. 4-1: Digital I/O: Channels

On this page, you can configure the digital channels as pairs of inputs or outputs. For each output, also
the status (0 or 1) has to be defined.

Fig. 4-2: Channels: Rearm

After a short-circuit occurred, the required rearm (see Chapter 3.4) can be carried out via the
correspondent button.

Fig. 4-3: Digital I/O: Digital input filter configuration

For the digital inputs, a filter can be defined.
The filter time can be between 1 μs and 65535 μs. By entering the value 0, the filter will be
deactivated.
www.addi-data.com
18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MSX-E1516 and is the answer not in the manual?

Table of Contents