Preface; Packing Content; Safety Specifications - ColorKey Mover Beam 4 Zoom User Manual

I. Preface
Thank you for purchasing the ColorKey Mover Beam 4 Zoom. Please read these instructions
carefully before use. Operating this fixture according to these instructions is important to avoid
any possible damage or accidents caused by misuse.

Packing Content

Ø One light
Ø One DMX cable
Ø One power cable
Ø User manual
Note: Please check if all the contents are completed after unpacking, then, check if the light is
undamaged.

Safety specifications

Caution! Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning! To avoid electrical shock, be sure to disconnect power before any service or when moving or setting up the
fixture.
Caution! Avoid direct eye exposure with the fixture when on.
Ø This fixture is for indoor use only.
Ø This fixture must be installed a minimum distance of 5 meters (16'4") away from any lighted objects.
Ø Do not install or operate this fixture near flammable materials.
Ø This device must be installed, operated, and maintained by a qualified professional.
Do not touch the fixture with bare hands during operation as the surface temperature of the fixture can exceed
Ø
60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to cool before attempting to touch it.
Ø Please check if the voltage is in accordance with the rated power before installing.
Do not operate this fixture if the power cord has been damaged. Turn off fixture and replace with a power cord of
similar rating.