Olympus DELTA 50 Quick Start Manual page 24

103076-01EN [U8998318], Rev. C, June 2014
WARNING
• Before turning on the instrument, you must connect the protective earth
terminal of the charger/adaptor to the protective conductor (mains) of the
power cord. The mains plug shall only be inserted into a socket outlet
provided with a protective earth contact. Never negate the protective action
by using an extension cord (power cable) without a protective conductor
(grounding).
• If there is any possibility that the ground protection could be impaired, you
must make the instrument inoperative and secure it against any unintended
operation.
• The instrument must only be connected to a power source corresponding to
the type indicated on the rating plate.
If a non-approved power supply cord not dedicated to Olympus products is
used, Olympus will not be able to ensure the electrical safety of the equipment.
CE (European Community)
This device complies with the
requirements of both directive
2004/108/EC concerning electromagnetic
compatibility and directive 2006/95/EC
concerning low voltage. The CE marking
indicates compliance with the above
directives.
WEEE Directive
In accordance with European Directive
2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE), this
symbol indicates that the product must
not be disposed of as unsorted municipal
waste, but should be collected separately.
Refer to your local Olympus distributor
for return and/or collection systems
available in your country.
China RoHS
China RoHS is the term used by industry generally to describe legislation
implemented by the Ministry of Information Industry (MII) in the People's
Republic of China for the control of pollution by electronic information
products (EIP).
The China RoHS mark indicates the
product's Environment-Friendly Use
Period (EFUP). The EFUP is defined as the
number of years for which listed
controlled substances will not leak or
chemically deteriorate while in the
product. The EFUP for the DELTA has
been determined to be 15 years.
Note: The Environment-Friendly Use
Period (EFUP) is not meant to be
interpreted as the period assuring
functionality and product performance.
26 Important Information — Please Read Before Use
EMC Directive Compliance
FCC (USA) Compliance
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio-frequency energy, and if not installed
and used in accordance with the instruction manual, might cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case you will
be required to correct the interference at your own expense.
Warranty Information
Olympus guarantees your Olympus product to be free from defects in
materials and workmanship for a specific period, and in accordance with the
conditions specified in the Olympus Scientific Solutions Americas Inc. Terms and
Conditions available at http://www.olympus-ims.com/en/terms/.
The Olympus warranty only covers equipment that has been used in a proper
manner, as described in this instruction manual, and that has not been
subjected to excessive abuse, attempted unauthorized repair, or modification.
Inspect materials thoroughly on receipt for evidence of external or internal
damage that might have occurred during shipment. Immediately notify the
carrier making the delivery of any damage, because the carrier is normally
liable for damage during shipment. Retain packing materials, waybills, and
other shipping documentation needed in order to establish a damage claim.
After notifying the carrier, contact Olympus for assistance with the damage
claim and equipment replacement, if necessary.
This instruction manual explains how to safely operate your Olympus product.
The information contained herein is intended solely as a teaching aid and shall
not be used in any particular application without independent testing and/or
verification by the operator or the supervisor. Such independent verification of
procedures becomes increasingly important in line with the criticality of the
application. For this reason, Olympus makes no warranty, expressed or
implied, that the techniques, examples, or procedures described herein are
consistent with industry standards, nor that they meet the requirements of any
particular application.
Olympus reserves the right to modify any product without incurring the
responsibility for modifying previously manufactured products.
Technical Support
Olympus is firmly committed to providing the highest level of customer
service and product support. If you experience any difficulties when using our
product, or if it fails to operate as described in the documentation, first consult
the user's manual, and then, if you are still in need of assistance, contact our
After-Sales Service. To locate the nearest service center, please contact the Sales
Representative the product was purchased from.
Trademarks
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Olympus Corporation is
under license.