Cabinet Anti-Tip/Anti-Tip Bracket - Perlick CR24D Service Manual

Column Refrigeration Service Manual

8.19 Cabinet Anti-Tip/Anti-Tip Bracket

WARNING
To prevent the unit from tipping forward, the
anti-tip bracket must be installed. Use all anti-tip
bracket hardware as instructed. Level as instructed
on Page 98 prior to installing anti-tip bracket(s)
The anti-tip bracket and supporting hardware
is included with your unit. Please note that four
anti-tip brackets are required for each unit or dual
installation. In the case of dual installation, each
individual unit must be outfitted with the two anti-
tip brackets on cabinet sides for a total of four.
For drawings of the anti-tip bracket installation
on integrated (built-in) units, see
drawings of the anti-tip bracket installation on
freestanding units, see
Return to Table of Contents
Page 100 . For
Page 101 .
WARNING
Verify there are no electrical wires or plumbing in the
area which the screws could penetrate.
Always wear safety glasses and use other necessary
protective devices or apparel when installing or
working with anchors. Anchors are not recommended
for use in lightweight masonry material such as block
or brick, or for use in new concrete which has not
had sufficient time to cure. The use of core drills is
not recommended to drill holes for anchors.
Before moving unit into position, secure the door
closed and protect any finished flooring.
Use an appliance dolly to move the unit near the
opening.
CAUTION
CAUTION
99