Control Buttons - AG Neovo LE-22E User Manual

PRODUCT DESCRIPTION

1.3 Control Buttons

LED Indicator
LE-22E
Button
Auto Button
(AUTO)
Description
Auto Adjustment (available in VGA input only)
Press and hold the AUTO button to perform auto adjustment. This function
automatically tunes the LCD display to its optimal setting, including horizontal
position, vertical position, clock, and phase.
When auto adjustment is initiated, the below message is displayed on the screen.
When the message disappears, this indicates the auto adjustment is completed.
Note:
• During auto adjustment, the screen will slightly shake for a few seconds.
• It is recommended to use the auto adjustment function when using the
LCD display for the first time or after a resolution or frequency change.
Input Quick Menu
• Press the AUTO button to call out the Input quick menu.
Then press the AUTO button repeatedly to switch the input source and press
the MENU button to confirm.
During OSD menu
• Use to close the OSD menu or exit a submenu.
During volume adjustment or Eco mode selection
• Use to close the respective quick menu.
LED Indicator
LE-24E
Auto Configure
Please wait
D-SUB
HDMI
DisplayPort
12
LED Indicator
LE-27E