TABLE OF CONTENTS Contents SAFETY INFORMATION FCC Declaimers ............................3 WEEE ................................3 PRECAUTIONS Notice ................................4 Cautions When Setting Up ........................... 4 Cautions When Using ........................... 5 Cleaning and Maintenance ........................... 6 Notice for the LCD Display ........................... 6 Transporting the LCD Display ........................
Safety Information SAFETY INFORMATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Precautions PRECAUTIONS PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal injury or damage to the product. This icon indicates important operating and servicing information. Notice •...
Users who have already mounted the display on the ceiling or any other horizontal surface overhead are strongly advised to contact AG Neovo for consultations and solutions to help ensure a most pleasurable and fulfilling display experience.
PRECAUTIONS Cleaning and Maintenance Use a soft cloth to clean the glass surface and the housing. The display can be cleaned using a cloth moistened with 95% ethyl alcohol. Do not rub or tap the surface of the glass with sharp or abrasive items such as a pen or screwdriver.
PRECAUTIONS Transporting the LCD Display To transport the LCD display for repair or shipment, place the display in its original packaging box. 1. Remove the stand. a. Place the LCD display with the screen side down on a cushioned surface. b.
PRODUCT DESCRIPTION 1.2 Installation 1.2.1 Installing the Stand 1. Place the LCD display with the screen side down on a cushioned surface. 2. Attach the stand to the LCD display. a. Align and attach the stand to the rear of the LCD display. b.
PRODUCT DESCRIPTION 1.2.2 Adjusting the Viewing Angle and Height For optimal viewing, it is recommended to look at the full face of the screen, then adjust the screen of the LCD display angle and height according to your preference. Hold the stand so that the screen does not topple when you make the adjustment. You are able to adjust the screen angle and height as below: Tilt angle: Pivot angle:...
Note: Take measures to prevent the LCD display from falling down and lessen possible injury and damage to the display in case of earthquakes or other disasters. • Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All AG Neovo wall mount kits comply with VESA standard.
PRODUCT DESCRIPTION 1.3 Control Buttons LED Indicator LED Indicator LED Indicator LE-22E LE-24E LE-27E Button Description Auto Button Auto Adjustment (available in VGA input only) (AUTO) Press and hold the AUTO button to perform auto adjustment. This function automatically tunes the LCD display to its optimal setting, including horizontal position, vertical position, clock, and phase.
Page 13
PRODUCT DESCRIPTION Button Description Decrease / Increase Volume Quick Menu Button ( • Press the button to call out the Volume quick menu. Volume Then press the button to adjust the volume level. Note: • During volume or menu setting adjustment, press and hold the button to change the values continuously.
PRODUCT DESCRIPTION 1.4 Overview 1.4.1 Front View LE-22E LE-24E LE-27E Display screen Control buttons Press the button to perform its function. For more information about each button, refer to page...
HDMI VGA IN AUDIO IN AC IN HDMI VGA IN AUDIO IN AC IN HDMI VGA IN AUDIO IN LE-22E LE-24E LE-27E AC IN HDMI VGA IN AUDIO IN AC Power Input Use to connect the power cord. DP(DisplayPort) connector Use to connect a DP cable for digital input signal.
Chapter 2: Making Connections CHAPTER 2: MAKING CONNECTIONS CAUTION: Make sure that the LCD display is not connected to the power outlet before making any connections. Connecting cables while the power is ON may cause possible electric shock or personal injury. 2.1 Connecting the AC Power 1.
MAKING CONNECTIONS 2.2 Connecting Input Source Signals Input source signals can be connected with either of the following cables: • DP HDMI VGA IN Connect one end of a DP cable to the DP connector of the LCD display and the other end to the DP connector of the computer.
MAKING CONNECTIONS 2.3 Connecting Audio Devices • Audio Input Connect one end of an audio cable to the audio port of the LCD display and the other end to the audio port of the computer. AUDIO IN • Audio Output Connect a headphone to the headphone jack of the LCD display.
Chapter 3: On Screen Display Menu CHAPTER 3: ON SCREEN DISPLAY MENU 3.1 Using the OSD Menu 1. Press the MENU button to call out the OSD window. T P V Luminance Contrast Brightness Main Submenu menu Eco Mode Standard Menu option :Exit...
ON SCREEN DISPLAY MENU 3.2 OSD Menu Tree Main Menu Submenu Reference Contrast Refer to page 22. Luminance ( Brightness Eco Mode Text Internet Game Movie Sports Standard Clock Refer to page 23. Image Setup ( Phase H. Position V. Position Image Ratio Wide Color Temp.
Page 21
ON SCREEN DISPLAY MENU Main Menu Submenu Reference H. Position Refer to page 25. OSD Setup ( V. Position Timeout Language English Spanish French Portuguese Russian Simplified Chinese Traditional Chinese Korean Input Select Auto Refer to page 26. Extra ( D-SUB HDMI DisplayPort...
Chapter 4: Adjusting the LCD Display CHAPTER 4: ADJUSTING THE LCD DISPLAY 4.1 Luminance Setting 1. Press the MENU button to call out the OSD window. 2. Press the - or + button to select and press the MENU button to enter the Luminance menu.
ADJUSTING THE LCD DISPLAY 4.2 Image Setup Setting 1. Press the MENU button to call out the OSD window. 2. Press the - or + button to select and press the MENU button to enter the Image Setup menu. T P V T P V Image Setup Image Setup...
ADJUSTING THE LCD DISPLAY 4.3 Color Temperature Setting 1. Press the MENU button to call out the OSD window. 2. Press the - or + button to select and press the MENU button to enter the Color Temp. menu. T P V T P V Color Temp.
ADJUSTING THE LCD DISPLAY 4.4 OSD Setup Setting 1. Press the MENU button to call out the OSD window. 2. Press the - or + button to select and press the MENU button to enter the OSD Setup menu. T P V T P V OSD Setup OSD Setup...
ADJUSTING THE LCD DISPLAY 4.5 Extra Setting 1. Press the MENU button to call out the OSD window. 2. Press the - or + button to select and press the MENU button to enter the Extra menu. T P V T P V Extra Extra...
Chapter 5: Appendix CHAPTER 5: APPENDIX 5.1 Warning Messages When any of these warning messages appear, check the following items. Warning Message Cause Solution The resolution or the refresh √ Change the resolution or the rate of the graphics card of refresh rate of the graphics Input Not Support the computer is set too high.
APPENDIX 5.2 Troubleshooting Problems Possible Cause and Solution No picture. • Check if the LCD display is turned ON. • Check if the power adapter is properly connected to the LCD display. • LED indicator is OFF. • Check if the power cord is plugged into the power outlet. •...
SPECIFICATIONS 6.2 Display Dimensions LE-22E 248.87mm 100mm 505.60mm 313.10mm 100mm AC IN HDMI VGA IN AUDIO IN 181.56mm LE-24E 249mm 50.33mm 566mm 100mm 100mm 343.2mm AC IN HDMI VGA IN AUDIO IN 166.96mm...