Clock Adjustment - andrews WHiC56 Owner's Manual

Clock Adjustment

Operation
1
Press the button
inside the cover.
2
Press the button.
3
1) Use the buttons to
reset the clock.
2) Press the
to complete the clock setting.
* In the event of a power outage or after disconnecting power to the water heater, when power is
restored, the clock on the display screen will show " - : - - " and the clock will need to be reset.
* Normally, when the
display the clock when the
[For All Systems]
Cover shown in
the open position.
Screen Display
1)
(Ex: AM10:15)
2)
button
The screen returns to the previous screen.
button is turned OFF, the clock display disappears, but it is possible to
button is turned OFF by changing a setting. (
Description
* This adjustment can be made
regardless of whether the
button is ON/OFF.
* The time changes in 1-minute
increments with each press
o f t h e bu t t o n , a n d t h e n i n
10-minute increments if the
button is kept pressed down.
* If the display is left untouched for
approximately 20 seconds without
pressing the button , the
setting will be completed. When
the button is turned ON,
the home screen will be restored.
p.24)
23