andrews WHiC56 Owner's Manual page 35

Operation
4
Turn on hot water.
5
When water delivery volume
reached to the preset volume
of water, an alarm
will sound alerting
you to shut off
the water.
Turn off the hot
water when the
alarm sounds
to prevent
overfilling.
Hot Water Filling Temperature Options
( °C :
The temperatures settings below are only examples. The temperature setting
necessary will depend on the usage, the length of piping and the time of year.
37 38 39 40 41 42 43 44 45 46 47 48
Warm Warmer
* Initial factory setting: 40°C
Screen Display
Lit during combustion
If the hot water temperature has been
set so that it does not require mixing, set
the mixing valve to its highest setting.
The hot water in the bathtub may become
lukewarm if it is mixed with cold water at the fixture.
Beep Beep!
)
Hot
* Why doesn't the flow meter
alarm sound even if the water
delivery volume reached to the
preset volume.
* The alarm will continue to sound
even if the
* Although the temperature can be set to 50°C or higher,
do not set the temperature to 50°C or higher as it can
cause severe burns instantly or death from scalding.
* The hot water filling temperature is same as the setting temperature.
* The setting temperature displayed may vary from the actual
temperature at the fixture depending on conditions such as
season or length of piping.
Description
The highest
temperature
button is pressed.
33