andrews WHiC56 Owner's Manual page 23

[For All Systems]
Hint for operation
Follwing this procedure allows for automated control of water heater operation without user interaction.
Ex. 1: Both "ON" and "OFF"
functions are automated.
AM PM
10:00 8:00
Automatically
turned "ON"
Operation
4
Check "Set" is selected,
and then press
to confirm all settings.
Operation
1
button is "ON".
To Deactivate Automatic Operation
button is "OFF".
* If the button is not set to "OFF", the water heater will automatically turn "ON" or "OFF" at the set times.
* If there is a power failure or power is disconnected to the water heater, automatic operation will be deactivated.
* The setting time shown on the display of the remote controller is for example purposes only.
Ex. 2: Only "ON" function is
automated.
AM
10:00
Automatically Automatically
turned "OFF" turned "ON"
Screen Display
button
Activate Automatic Operation
Screen Display
(Display Example)
Ex. 3: Only "OFF" function is
your desired time your desired time
Manually
turned "OFF"
* If you do not press
the time setting is not completed.
* If you want to change "ON/OFF
time", select "Reset" and then press
the
* You can activate automatic
operation regardless if the
button is "ON" or "OFF".
*
* "Start time" and "End time" will
be displayed upon activation.
* If both the "Start time" and "End
time" are set to "- : --", the alarm
sounds "Pi Pi Pi" and
is displayed.
* The
automated.
PM
8:00
Manually
turned "ON"
Automatically
turned "OFF"
Description
button,
button, return to step 2.
Description
indicator is lit when activated.
indicator is unlit.
21