When Using Rc-7508M; Clock Adjustment - andrews WH42 Owner's Manual

When using RC-7508M

Clock Adjustment

On this Display
1
2
3
(Eg.: AM 10:15)
10
(Eg.: 40°C)
In the event of a power cut or after disconnecting the power supply, when the
power is restored, the clock on the display screen shows "0:00", so the clock
needs to be re-set.
Operation
Press the
ON/OFF
button to turn it
"On".
Press the SET
button to change the
display until "time
set" is shown.
Use the buttons
to adjust the clock.
< Completion of setting >
Description
* The is lit.
ON/OFF
* The time changes in 1-minute
increments with each press on the
button, and then in 10-minute
increments if the button is kept
pressed down.
* When the SET button is pressed,
or the console is left untouched for
about 20 seconds, the settings
screen ends.