[Single Water Heater Only]; Flow Meter Alarm - andrews WHiC56 Owner's Manual

Flow Meter Alarm

Operation
Preparation
1
button is "ON".
2
1) Press the
cover, Select "Flow meter" using
the buttons.
2) Press the
3
Adjust the Flow Meter
Alarm volume setting
1) Change the volume with
your desired hot
water volume.
2) Press the
Fill Volume Options
40 60 80 100 120 140
32
Screen Display
Confirm that the
stopper is closed.
(Ex: Home screen)
Check
1)
button inside the
2)
button.
1)
to
2)
button.
160 180 200

[Single Water Heater Only]

If the flow meter alarm is being used to indicate when
water delivery volume is reached to the preset volume.
• If any hot water is being used besides what is going
into the tub, the alarm will sound before the tub is full.
• If there was water in the tub before the fill
began, or if the water is not shut off manually
when the alarm sounds, the tub may overflow.
• If there was water in the tub before the fill
began, the temperature in the tub after it is full
may be different from the temperature setting.
(Ex: Alarm off)
(Ex: 180 L)
220 240 260 300 340 380
Description
* The indicator is lit.
* The current setting
temperature is displayed.
* The current hot water filling
volume is displayed.
* The set hot water volume will
be stored in memory.
* The screen returns to the
home screen.
* If the display is left untouched
for approximately 20 seconds
without pressing the button ,
the setting will be completed and
the home screen will be restored.
(L)
Alarm off
(Default setting = Alarm off)