S4048-Leaf1 has two paths to all other leafs and two paths to Server 3's network, 172.16.2.0. There is one
path through each spine. If all paths do not appear, make sure the maximum-paths statement in the BGP
configuration is equal to or greater than the number of spines in the topology.
Z9100-Spine1# show ip route bgp
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, * - candidate default,
+ - summary route, > - non-active route
Gateway of last resort is not set
Destination
-------------------------------------------------------------------------------
B
EX 10.0.1.2/32
B
EX 10.0.2.1/32
B
EX 10.0.2.2/32
B
EX 10.0.2.3/32
B
EX 10.0.2.4/32
B
EX 172.16.1.0/24
B
EX 172.16.2.0/24
S4048-Leaf1# show ip route bgp
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, * - candidate default,
+ - summary route, > - non-active route
Gateway of last resort is not set
Destination
-------------------------------------------------------------------------------
B
EX 10.0.1.1/32
B
EX 10.0.1.2/32
B
EX 10.0.2.2/32
B
EX 10.0.2.3/32
B
EX 10.0.2.4/32
59
Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0
Gateway
via 192.168.1.1
via 192.168.1.3
via 192.168.1.5
via 192.168.1.7
via 192.168.1.1
via 192.168.1.3
via 192.168.1.5
via 192.168.1.7
via 192.168.1.1
via 192.168.1.3
via 192.168.1.5
via 192.168.1.7
Gateway
via 192.168.1.0
via 192.168.2.0
via 192.168.1.0
via 192.168.2.0
via 192.168.1.0
via 192.168.2.0
via 192.168.1.0
via 192.168.2.0
Dist/Metric
20/0
20/0
20/0
20/0
20/0
20/0
20/0
Dist/Metric
20/0
20/0
20/0
20/0
20/0
Last Change
00:54:54
00:55:44
00:54:54
01:38:06
01:37:52
00:54:54
01:37:49
Last Change
01:00:13
01:00:11
00:59:23
01:00:11
01:00:11