Dell PowerEdge R730xd Deployment Manual page 20

Emc networking with isilon front-end deployment and best practices guide
Hide thumbs Also See for PowerEdge R730xd:
Table of Contents

Advertisement

OS10EE Spine
Set the hostname, configure the OOB management interface and default gateway.
Z9100-ON Spine 1
configure terminal
hostname Z9100-Spine1
interface mgmt 1/1/1
no ip address dhcp
no shutdown
ip address 100.67.169.37/24
management route 0.0.0.0/0 100.67.169.254
Configure the four point-to-point interfaces connected to leaf switches. In this example, each of the
connections from the Z9100-ON spine to the S4048-ON leaf switches needs to have the speed set to 40GbE.
Next, assign IP addresses per Table 3. Configure a loopback interface to be used as the router ID. Isilon's
OneFS supports and recommends the use of jumbo frames. Each interface used below will be configured
using jumbo frames.
20
Dell EMC Networking with Isilon Front-End Deployment and Best Practices Guide | version 1.0
Z9100-ON Spine 2
configure terminal
hostname Z9100-Spine2
interface mgmt 1/1/1
no ip address dhcp
no shutdown
ip address 100.67.169.36/24
management route 0.0.0.0/0 100.67.169.254

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S3048-onS4048-onIsilon x210Z9100-onPoweredge r640

Table of Contents