Drive Data
KP1S can record not only video and audio, GPS information, speed but also vehicle
information like the alarm, G-Sensor, brake, speed Pulse and RPM together (INT-2 power
adaptor is required for Speed Pulse & RPM)
The recorded information can be Analyzed and played through the KP1S Analysis
software.
The default setting only displays the G-sensor graphs but other information may
be added by checking the boxes in the upper part of the screen. Other information
included;
•
G-Sensor: (X axis: red, Y axis: green, Z axis: blue, based on the positioning of
the main unit) is shown with the data reference point zero-point calibrated and
positive shocks as (+) and negative shocks as (-).
•
Speed: GPS measured speed is displayed in grey while the speed-pulse
measured speed is displayed in red.
•
RPM: Displayed in purple.
•
ALL TRIGGERS (signals and alarms) are displayed on the bottom of the screen
with the grey bar meaning the trigger is activated.