Over Speed
This function will allow the user to set a speed limit on the unit and alert the driver
when the limit has been exceeded.
Excessive speeds can be set in 2 stages. The first limit is 50mph and the second limit
is 70mph.
When the 50mph limit is reached, the ORANGE LED will be lit.
When the 70mph limit is reached, the ORANGE LED will be blink quickly.
The trigger on the unit will sound twice when both limits have been exceeded.
SD Card Initialization
It's recommended to use the Configuration Tool to initialize a new SD card before
using with KP1S. Configuration Tool Software can be downloaded from
http://support.smartwitness.com
TE
It is recommended to select "No Configuration File" at first initialization. After
SD card is initialized, you can set your desired settings and then click "Save"
to apply the settings to the SD card.