Communication - SmartWitness KP1S User Manual

Please Note
If there are 6 'beeps' sounded from the unit, this means that there is an SD card error
or the SD card is full.
Driving File Record
The DRV (Driving) file will be recorded during driving even if there are no events or
video. The DRV file consists of GPS and G-sensor data. This helps to find specific
data or driving behaviors.
The DRV file overwrites the oldest data. The DRV files will be made every 10 minutes.

Communication

The USB 3G/WiFi modem is inserted to the USB terminal inside the locking case.
For a list of compatible USB modems with KP1S, please contact your local dealer.
During communication, the GREEN LED will be on to show you can communicate.
The GREEN LED will flash when communication is performed.
The dongle will need to be setup with the correct APN settings using the KP1S config
software.
If there is a communication error, the unit will 'Beep' twice.
If there are modem recognition errors, the unit will 'Beep' 3 times.