Configuration Software; Initialize Sd Card - SmartWitness KP1S User Manual

5. Configuration Software

Before using KP1S, you will need to open the configuration software to initialize the
SD card, configure settings on the unit such as telematics and resolution etc. Before
loading the configuration software, insert your SD card into the computer using an SD
card Reader.

Initialize SD Card

Firstly, on the configuration tool, you can initialize the SD card so it is ready for use in
KP1S. To do this, click the 'Initialize SD Card' button.
To initialize the SD card, click on the above icon and you will be presented with the
following screen to choose the SD card to initialize option.
Click 'OK' when you have selected the SD card. Then, click the 'Quick
Format' button and "No Configuration file" selection (As shown Below).
Only 1 card must have
a configuration file
nd
saved. The 2 card (if
used) only needs to be
initialized with "No
Configuration File"
selected. SD cards can
be inserted into either
slot and will not affect
operation