Table of Contents
Advertisement
TOOL PREPARATION
Your lawn mower is currently configured in transport
mode. The handlebar (1) is folded forward and is held
in place by the cutting height control knob (13) and the
handlebar adjustment levers (8).
Follow the start-up instructions below to begin to use
your lawn mower.
UNFOLDING THE TOOL
- Unlock the adjustment levers (8) by pulling them
backwards.
- With one hand, hold the cutting height adjustment
handle (13) whilst simultaneously pressing on the two
buttons to release its position.
- Hold the buttons down and pull the handle backwards.
- With your other hand, release the handlebar (1) and
reposition the handle in the notch in which it was held.
- Release the buttons and ensure that the handle is
correctly locked.
- Tilt the handlebar (1) backwards.
13
1
10
8
1
8
13
1
Advertisement
Table of Contents
