Table of Contents
Advertisement
ACCELERATION AND HANDLING OF THE TOOL
MOWING CONTROLS
Command 4: Turning the cutting blades
- Press the start button (6) with one hand and keep it
pressed down.
- Use your other hand to pull the bar (2).
- Release the start button (6). The motor starts.
CAUTION: For your safety always keep the four wheels on the ground . Do not run when you are
pushing the lawn mower . Be even more careful when mowing on bumpy and uneven ground
and when the collecting bin is full .
- The blade rotation speed can be set with the blade speed cutting adjustment knob located
on the control box .
- The speed of the cutting blades can be configured in AUTO mode:
1 steady green LED = 3000 to 5000 rpm depending on the difficulty of the mowing area.
- The speed of the cutting blades may be manually configured:
2 fixed LEDs = 3000 rpm; 3 fixed LEDs = 4000 rpm; 4 fixed LEDs = 5000 rpm.
- The rotation speed of the cutting blades is active as long as the bar is held .
Command 5: Rotation of the cutting blades with the Boost function
- Release and pull on the bar (2) very quickly .
2
In Boost mode the mower accelerates to its maximum speed (5000 rpm) for 2 .5 seconds, then
returns to its set speed .
The 4 LEDs are on when it is at maximum speed .
The boost function can be activated at any time in both automatic or manual mode . It is useful
when mowing irregularities are encounter (tall, dense grasses etc .) and avoids having to change
the initial settings of the mower .
22
6
2
2
Advertisement
Table of Contents
