Alternate Mounting Methods - Hunter WVC-100 Owner's Manual & Installation Instructions

Alternate Mounting Methods

A universal mounting clip and mounting adapter are also
provided with the WVC. These accessories provide for
alternate methods of mounting the controller either to
the side of the valve box or stake mounted within the
valve box.
Valve Box Mounting Method (Figure 3)
1. Position the universal mounting adapter on the side of
the valve box. Make sure that the bracket is positioned
so that the controller is as high up in the valve box as
possible, but does not interfere with the top of the
valve box cover.
2. Drive two screws to secure the adapter to the side of
the valve box.
3. Attach the WVC to the mounting clip and slide it on the
end of the mounting adapter.
10
Stake Mounting Method (Figure 4)
The universal mounting adapter can also be used to stake
mount the WVC.
1. Cut a section of ½" (13 mm) diameter plastic pipe.
2. Drive the pipe into the ground inside the valve box to
position the WVC to the desired height.
3. Slip the universal mounting adapter on top of the pipe.
4. Attach the WVC to the mounting clip and slide onto the
adapter.