The WVC can easily be mounted on any Hunter plastic
valve. A specially designed valve mounting clip makes
installation a snap.
Note:
When mounting the WVC, position the antenna
vertical and as high as possible in the valve
box to achieve maximum range for radio
communication.
Figure 2
Mounting the WVC to a Hunter Valve
To Mount the WVC to a Valve (Figure 2)
1. Unscrew the existing solenoid from the valve.
2. Screw the WVC latching solenoid into the valve bonnet.
3. Attach the large end of the valve mounting clip to the
middle of the WVC body (mounting clip supplied with
your WVC).
4. Snap the small end of the valve mounting clip to
the solenoid.
Note:
The total length of wire from the WVC to the
solenoid should not exceed 100' (30 m).
9