Wvc Components - Hunter WVC-100 Owner's Manual & Installation Instructions

WVC Components

This section provides an overview of the components of
the WVC. Each item will be discussed in further detail
later. However, this section can be helpful in getting
acquainted with the available options.
1. WVC Body – The WVC controller is designed to be dirt
tolerant, waterproof, and submersible to 12' (3.7 m).
2. External Antenna – Flexible rubber antenna for radio
communication.
3. 9-Volt Battery Holder – The WVC is designed to
operate on a single 9-volt alkaline battery. The battery
easily snaps into the battery holder.
4. Wires for DC Latching Solenoids – Leads are provided
for wiring DC latching solenoids. The red wires are
numbered on top of the WVC to provide station
identification. The black wire is the common wire.
5. Weather Sensor Wires – A Hunter Mini-Clik
micro-switch-type sensor can be connected to the
WVC.
6. Valve Mounting Clip – Allows the WVC to be mounted
directly to any Hunter valve. The clip can also be used in
conjunction with the Universal Mounting Adapter.
4
7. Universal Mounting Adapter – Allows for alternate
methods of mounting the WVC. It can be used to
mount the WVC to the side of the valve box or on a ½"
(13 mm) diameter section of plastic pipe.
8. LED Indicator Light – Used when setting the WVC
address.
or other
®