Lcd Panel - NEC Versa TXi Series Service Manual

Table of Contents

Advertisement

LCD Panel

Remove the LCD panel as follows.
1.
Remove the primary battery, keyboard, front cover and VersaGlide assembly, and top cover
assembly from the system.
2.
Unplug the following cables from the main board:
n
LCD panel interface cable from P5 on the main board
LCD panel microswitch cable from P24 on the main board.
n
Locate and remove the screw and cable bracket holding the interface cable in place. Note
3.
how the cable bracket holds the cable.
4.
Locate and remove the four screws fastening the LCD panel to the system. Remove the
LAN bracket.
Remove the LCD panel from the notebook.
5.
3-18 Disassembly and Reassembly
Removing the LCD panel
A – Left Screws (2)
B – Cable Bracket Screw
C – LCD Panel
D – Right Screw (1)
E – Connector P24
F – Connector P5

Advertisement

Table of Contents
loading

Table of Contents