NEC Versa TXi Series Service Manual page 29

Menu Item
Cylinders
Heads
Sectors
Maximum Capacity
Multi-Sector Transfers
LBA Mode Control
32-Bit I/O
Transfer Mode
SMART Monitoring
Ultra DMA Mode
2-12 System Configuration and Setup
Internal HDD Submenu Items
Settings (default is bold)
When Type is Auto, value in the Cylinders
field is auto-detected and field is read only.
When Type is Auto, value in Heads field is
auto-detected and field is read only.
When Type is Auto, value in Sectors field is
auto-detected and field is read only.
This field is read-only and cannot be changed
from BIOS Setup.
Example: 10056 MB
Disabled, 2, 4, 8, 16 sectors, Max.
Determines the number of sectors per block
for multi-sector transfers.
When Type is Auto, value in Multi-Sector
Transfers field is auto-detected and field is
read only.
Enabled, Disabled
When Enabled is selected, it causes logical
block addressing to be used in place of
cylinders, heads, and sectors.
When Type is set to Auto, the value in the
LBA Mode field is auto-detected and the field
is read only.
Disabled, Enabled
When Enabled, allows 32 bit data transfers.
Standard, Fast PIO1, Fast PIO2, Fast PIO3,
Fast PIO4, Fast PIO3/DMA1, Fast
PIO4/DMA2
Selects the method for moving data to and
from the drive.
When Type is set to Auto, the value in the
field is auto-detected and the field is read
only.
Enabled, Disabled
This field is read-only and cannot be changed
from BIOS Setup.
Disabled, Mode 0, Mode 1, Mode 2, Mode 3,
Mode 4
Selects the Ultra DMA Mode for moving data
to and from the drive. Autotype the drive to
select the optimum transfer mode.
When Type is set to Auto, the value in the
field is auto-detected and the field is read
only.