Nec Versabay Iv Slot Devices - NEC Versa TXi Series Service Manual

NEC VersaBay IV Slot Devices

The system comes with a CD-ROM drive, CD-RW drive, a DVD-ROM drive, or a combination
CD-RW and DVD-ROM drive installed in the NEC VersaBay IV slot. If the system has no
storage device in the slot, there might be a weight saving module or an optional secondary
battery in the slot.
Remove a device as follows.
1. Turn off and unplug the system, and close the LCD panel.
Note
A storage device can be removed while the system is on (hot swapping) or in a sleep
state (warm swapping). However, using the swap feature requires that the Phoenix BaySwap
Utility be installed and running. See the Versa TXi User's Guide for detailed information on using
the utility and hot swapping or warm swapping a storage device.
system is powered on or plugged in. Power down and unplug the system first.
Locate the device release latch to the right of the VersaBay IV slot.
2.
3. Position the latch to the open position.
Press in the latch to eject the device from the slot.
4.
Pull the device out of the system.
5.
Position the latch to the closed position to avoid damage to the latch.
6.
installed.
Removing a device from the NEC VersaBay IV slot
3-6 Disassembly and Reassembly
Do not remove or install the optional secondary battery while the
Install the weight-saving module in the slot if no other device is to be