While-Run Operation Mode Changing - Mitsubishi A1SJ71PB92D User Manual

8. PROGRAMMING

8.6 While-Run Operation Mode Changing

The operation mode is changed by writing "0000h" (the operation mode is changed to the normal
operation mode without the mode registered onto E
area of the buffer memory.
Exchange
start
request
signal
Y00
Operation
mode change
request signal
Y11
X11
Operation
mode change
completion
signal
X11
Execution
condition
2
PROM) to the operation mode change request
8-6
MELSEC-A
Writes the operation mode to the
"operation mode change request area".
Reads the change result from the
"operation mode change result area".
Reads the operation mode from the
"current operation mode".