Studer OnAir 3000 Service Instructions Manual page 346

SCore Live
LEDs IDLE / FAIL
10 / 100 / 1000
Integrated LEDs
DIP Switch
IP Address (
18 SCore Live
1 2 3 4
S2 Default
Setting:
IDLE
ON
OFF
OFF
ON
Ethernet speed indication:
'10' on: 10MBit/s
'100' on: 100MBit/s
Both LEDs on: 1GBit/s
The LEDs within the Ethernet connectors have the following meaning:
Orange: Half-duplex operation
Green: Traffic/activity
S2 Used for factory testing only. During normal operation, all segments must be
set to OFF.
When replacing a Bridge card in an SCore Live of an OnAir 3000 system,
)
copy the IP address of the old card (can be found in the DSP.ini file) to the
new card using Internet Explorer. Otherwise the system will not be operative.
The required procedure is described in
OFF
FAIL
Redundant card in idle mode
OFF
Card is processing
OFF
Card has detected an error and is disconnected from the
ON
TDM Bus
Card is booting code
ON
chapter 3.3.1.
Date printed: 28.02.11