Ports And Leds - Cisco ASA 5550 Series Getting Started Manual

Ports and LEDs

Rear Panel LEDs and Ports in Slot 0
Figure 3-6 Rear Panel LEDs and Ports on Slot 0 (AC Power Supply Model Shown)
LNK 3 2 1 0 SPD
1
1 Management Port
2 External CompactFlash slot 7
3 Serial Console port
4 Power switch
5 Power indicator LED
1. The management 0/0 interface is a Fast Ethernet interface designed for management traffic only.
2. Reserved for future use.
3. GigabiteEthernet interfaces, from right to left, GigabitEthernet 0/0, GigabitEthernet 0/1, GigabitEthernet 0/2, and
GigabitEthernet 0/3.
Cisco ASA 5550 Getting Started Guide
3-10
Figure 3-6 shows the rear panel LEDs and ports in Slot 0.
1
LINK SPD
3
6
6 USB 2.0 interfaces
Network interfaces
8 Power indicator LED
9
Status indicator LED
10 Active LED
For more information on the Management Port, see the management-only
command in the Cisco Security Appliance Command Reference.
Chapter 3 Installing the Cisco ASA 5550 Security Appliance
2
FLASH
LINK SPD LINK SPD LINK SPD
2 1 0
8 10 12
7
9 11
2
11
3
12
13
14
3
4
5
14
13
VPN LED
Flash LED
AUX port
Power connector
78-17644-01