Cisco ASA 5550 Series Getting Started Manual page 63

Hide thumbs Also See for ASA 5550 Series:

Table of Contents

Chapter 6

Scenario: DMZ Configuration

appliance that processes the traffic, whether the traffic is incoming or outgoing,

the origin and destination of the traffic, and the type of traffic protocol and service

to be permitted.

In this section, you create an access rule that permits incoming HTTP traffic

originating from any host or network on the Internet, if the destination of the

traffic is the web server on the DMZ network. All other traffic coming in from the

public network is denied.

To configure the access control rule, perform the following steps:

In the ASDM window:

Step 1

78-17644-01

Click the Configuration tool.

In the Features pane, click Security Policy.

Click the Access Rules tab, and then from the Add pull-down list, choose

Add Access Rule.

The Add Access Rule dialog box appears.

Configuring the Security Appliance for a DMZ Deployment

Cisco ASA 5550 Getting Started Guide

6-19

Table of Contents